COOL-CONCENTRATE is a fully synthetic, water-soluble coolant concentrate. Cool-Concentrate provides long terms protection against corrosion. When mixed with water, COOL CONCENTRATE is a very efficient coolant. .
Very efficient heat removal
Prevents electrochemical corrosion.
Effective in protecting aluminium, non-ferrous and ferrous metals from corrosion.
Zinc- plated parts are not affected
Compatibility with plastics typically used in machine construction and with sealing materials has been tested and confirmed
COOL-OIL is a mineral oil based, non- water- miscible coolant for high- frequency spindles. COOL-OIL removes heat efficiently due to its composition. COOL-OIL is a long life spindle cooling oil which is low in aromatic compound and it efficiently protects the components in your machine from corrosion. .
Excellent thermal capacity
Not a hazardous material
Low evaporation loss
Long term corrosion protection
Optimal compatibility with materials
Low in aromatic compounds
Free of any solvents (VOCs)
COOL-OIL requires no special maintenance. In optimal operating conditions and when guidelines for use are observed, COOL-OIL can remain in use for 5 years. If during this period oil has to be replenished, only fresh COOL-OIL may be added. When doing so, observe the maintenance guidelines of the spindle/ machine manufacture.
Coolant ready for use, for motor spindle systems Formulated for Step Tec.
COOL-CORE READY is used as coolant and an anti- corrosion agent in motor spindle cooling systems, in particular where there is an inadequate supply of clean drinking water available for mixing purposes. The substance it contains passivate the various materials and provide long-terms protection against corrosion. .
Prevents electrochemical corrosion
Protects aluminium, ferrous and non-ferrous metals
Long term protection
COOL-CORE READY is ready to use: do not add any water. An average operating temperature of 20-25⁰C will provide very effective long-term protection.
Hydraulic oils Hyperclean ISO 4406 purity class 15/13/10
SPINDLE LUBE OILS are ultra-fine filtered HLP-D hydraulic oil (DIN 51 524/T2). The purity class is specified as 15/13/10 in accordance with the ISO 4406 standard. They are characterised by excellent detergent and dispersing properties. .
High-performance water-miscible coolants for general-purpose use
Ultra-fine filtered of purity class 15/13/10 in accordance with ISO 4406